Installation
Hanging floating wall shelf
Hanging Strackk floating shelves is quick and easy in accordance with a short manual. All mounting materials such as dowels, screws, ruler and a level are included.
You can find videos of Strackk shelves being hung on the Strackk YouTube channel.
Assembly wall shelf with lighting
Please read our manual so you are well prepared before the shelf is delivered. The shelf does not have a plug that can be plugged directly into a wall outlet. As shown in the movie on the right, the long cable with 2 boxes (transformer and controller) will have to be hidden away in the wall or in a cabinet. You can find more videos on our Strackk YouTube channel.
Corner shelf
The total length of your Strackk corner shelf can be a minimum of 110cm and a maximum of 700cm. The total length is the length at the wall side of the left part added with the right part. You enter this total length at the top of the order menu and later in the menu you enter the length of the left and right sections.
Strackk only supplies boards for an inside corner, not for an outside corner (around a cove, for example). Measuring the inside corner is done using a digital or analog angle meter whose arms are at least 40cm.
Using your angle meter, follow the following steps:
- Keep the meter well level (not skewed) during the measurement.
- Place the center of the angle meter exactly at the point where the two walls meet and make sure the arms of the angle meter are flush with the walls.
- Read the number of degrees of the angle.
- Take the measurement several times to ensure accuracy.
- The measured angle, rounded to whole degrees is the number you enter when ordering. For a Strackk corner shelf, the minimum number of degrees is 75 and the maximum is 175. Strackk ensures that boards are mitred exactly in the middle of this corner so that you receive a left and right shelf that can be hung seamlessly against each other in the corner.
- Hanging a shelf without lighting is easy according to these instructions.
Assembly Bookend
Installing the bookend is very easy. Use two screws to fasten the metal bracket to the bookend, which you then place on the shelf. All mounting materials included. You only need a screwdriver.
View the manual for mounting the Strackk Bookend.
Installing Room Divider
Hanging the room divider is easy when you do it with 2 persons. With supplied steel cables you can attach the Room Divider to the ceiling. You can attach the cables to the floor as well, but you don't have to. If you attach the cables also to the floor, the Room Divider has more stability. If you have underfloor heating, it is not possible to attach the cables to the floor.
In addition to the manual for hanging our Room Divider we also supply the steel cables, plugs, screws, a ruler and a spirit level. We have a specific manual for installing the Room Divider with lighting.